Home / SF6 Circuit Breakers / 126kV SF6 Breaker

Baocheng Electrical

126 kV SF6 Circuit Breaker — LW36-126

Outdoor three-phase switching and protection for 110 kV nominal-system projects, with a 126 kV equipment rating and a CTB-1 spring operating mechanism.

LW36-126 — 126 kV Rated Voltage

For 110 kV nominal-system projects
3150 A · 40 kA · Outdoor

126KV SF6 Breaker

Electrical Characteristics

Nominal system voltage

110 kV

Equipment rated voltage

126 kV

Continuous current

3150 A

Short-circuit breaking current

40 kA

Product Overview

The LW36-126 is an outdoor SF6 circuit breaker with three poles and one interrupter per phase. It combines SF6 insulation and arc interruption with a common spring-operated drive for three-phase switching.

The supplied manual lists a rated voltage of 126 kV, a rated continuous current of 3150 A and a rated short-circuit breaking current of 40 kA. These equipment ratings are kept separate from the nominal voltage used to describe the power system.

Use the 110 kV nominal system as the principal selection basis for this page. Final suitability depends on the project’s maximum operating voltage, insulation coordination, frequency, short-circuit duty and service conditions.

Model Meaning

LW36–126(W)/T3150–40
SF6 circuit breakerOutdoor typeDesign sequence numberRated voltage (kV)Anti-fouling typeSpring mechanismRated current (A)Rated short circuit breaking current (kA)

Technical Specifications

Main mechanical parameters of circuit breaker

No.ItemUnitValue
01Rated voltagekV126
02Rated power frequency withstand voltageTo groundkVK·230
Between breaksK·265
03Rated lightning impulse withstand voltageTo groundK·550
Between breaksK·630
04Power frequency withstand voltage (5min) at retail gauge pressure of SF6 gasK·95
05Rated frequencyHz50
06Rated currentA3150
07First opening coefficient1.5
08Rated short-circuit breaking currentkA40
09Rated short-circuit closing current (peak value)kA100
10Rated short-circuit withstand current40
11Rated peak withstand current100
12Rated short-circuit durations4
13Rated out-of-step breaking currentkA10
14Near-zone fault breaking currentkA90%IK, 75%IK
15Rated line charging breaking currentA31.5
16Rated operation sequenceO-0.3s-CO-180s-CO
17Main circuit resistanceμΩ≤ 40
18Rated sulfur hexafluoride gas pressure (20°C gauge pressure)MPa0.6
19Alarm/minimum functional pressure (20°C gauge pressure)MPa0.55±0.03/0.50±0.03
20SF6 gas annual leakage rate<0.5%
21Gas moisture content (V/V)≤ 150×10-6
22Mechanical lifeoperations10000
23Radio interference levelμV≤ 500
24Creepage distanceBetween fracturesmm3906/3150
To the ground3906/3150
25The quality of SF6 gas filled in each unitkg10
26The quality of each circuit breakerkg1500

Note: External insulation is corrected according to the altitude correction factor K: K=1.13 for every 2000m above sea level; K=1.28 for every 3000m above sea level

Main Technical Parameters

LW36–126

Outdoor high voltage AC sulfur hexafluoride circuit breaker

Main technical parameters of the mechanism

No.ItemUnitValue
01Auxiliary circuit voltageVDC220 or DC110
02Opening and closing coil voltage/currentV/ADC110/4; DC220/2
03Energy storage motorRated voltageVDC220、AC220/DC110、AC110
Normal operating voltage rangeV85% ~ 110%
PowerW600
04Motor energy storage times≤ 15
05Heater and lighting circuit voltageVAC220
06Auxiliary switch rated voltageVDC220、AC220
07Auxiliary switch rated currentA10
08Auxiliary switch contacts10 normally open + 10 normally closed

Mechanical Adjustment Parameters

The mechanical adjustment of the product is shown in the table below.

No.ItemUnitValue
01Center distance between circuit breaker polesmm1750
02Moving contact strokemm120+30
03Moving contact contact strokemm25+20
04Cycle length of circuit breaker interphase operating linkmm110+30
05Opening speedm/s4.2-5m/s
06Closing speedm/s2.2-3 m/s
07Opening timems≤ 40
08Closing timems≤ 100
09Opening timems≤ 60
10Closing-opening timems≤ 80
11Opening-closing timems300
12Three-phase opening phase differencems≤ 2
13Three-phase closing phase differencems≤ 3

Construction and Working Principle

Three-phase arrangement

Three single-break poles are supported on a common frame and operated through a common spring mechanism.

SF6 arc interruption

The manual describes thermal expansion with assisted gas blowing to interrupt the arc during opening.

Spring operating mechanism

The CTB-1 mechanism stores mechanical energy for closing and opening operations. Match the auxiliary supply and control arrangement to the project.

Gas supervision

The manual provides separate SF6 refill-alarm and lockout settings for supervision of the gas condition.

LW36-126 SF6 Circuit Breaker: General Arrangement & Interrupter Construction

General Arrangement

lw36-126-126kv-outdoor-sf6-circuit-breaker-dimensions

Check the approved overall dimensions, phase spacing and foundation interfaces before installation.

Interrupter Construction

Structural diagram of the LW36-126 arc-extinguishing chamber

1. Porcelain housing
2.  Fixed contact base
3.  Nozzle
4. Fixed arcing contact
5. Contact finger
6. Moving arcing contact
7. Thermal expansion cylinder
8. Pull rod
9.  Intermediate contact
10. Lower support base

Applications and Service Conditions

Consider the LW36-126 for outdoor substation switching and protection duties on 110 kV nominal systems. Line bays, transformer bays and bus-coupling duties require project-specific checks of fault level, switching duty and insulation coordination.

For industrial receiving substations or renewable-generation grid connections, assess the same electrical and site requirements before selecting the breaker. The system’s nominal voltage alone does not determine suitability.

Parameter

Value

Ambient air temperature

−30°C to +40°C

Special low-temperature condition in the manual

−40°C to +40°C — confirm the supplied configuration

Altitude limit listed in the manual

≤4500 m — confirm insulation coordination for the installation altitude

Relative humidity, daily / monthly average

≤95% / ≤90% (at 25°C)

Wind pressure

≤700 Pa

Ice thickness

10 mm

Seismic acceleration, horizontal / vertical

≤0.3g / ≤0.15g

Maximum daily temperature variation

25°C

Nominal creepage distance

31 mm/kV

The altitude and special temperature limits are manual entries, not a statement that every supplied configuration meets every extreme condition simultaneously. Confirm site pollution, creepage, altitude corrections and the required low-temperature arrangement.

Features and Practical Benefits

3150 A continuous-current rating

A clearly defined current rating for load and busbar coordination.

40 kA short-circuit breaking rating

A stated fault-interruption rating to compare with the project fault study.

Separate insulation ratings

Power-frequency and lightning-impulse levels are listed separately for phase-to-earth and open-contact duties.

Spring-operated drive

The CTB-1 mechanism and specified auxiliary supplies provide a basis for control-system coordination.

Defined gas supervision settings

Refill-alarm and lockout values can be reviewed alongside the site’s alarm and interlocking requirements.

Technical Documents and Supply Scope

The supplied manual includes technical parameters, arrangement drawings, operating-mechanism information and electrical diagrams. Use project-approved documents for installation and commissioning.

Documents to Agree for the Order

  • Guaranteed technical particulars for the selected voltage, current, frequency and switching duties.
  • Approved general arrangement, foundation and terminal connection drawings.
  • Control schematic, terminal schedule and auxiliary-supply requirements.
  • Applicable inspection and test documents, instruction manual and packing list.

Supply Scope to Confirm

Agree the breaker assembly, operating mechanism, supporting structure, terminal connectors, accessories, spare parts and document package in the quotation. Inclusion of individual items is subject to the order.

The manuals reference GB 1984-2003 and IEC 62271-100:2001. These references identify the editions cited by the manuals; they do not establish certification to a current edition. Confirm the required standard and supporting test evidence for the project.

Technical and Purchasing FAQ

Is 126 kV the nominal system voltage?

No. 126 kV is the equipment rated voltage in the manual. This page uses 110 kV as the primary nominal-system selection basis, subject to project coordination.

Can the breaker be considered for a 115 kV system?

Only after a project-specific review. Confirm the maximum system voltage, required insulation levels, frequency, fault duty and applicable standards. The 115 kV entry is not a confirmed alternative rating.

What current and breaking ratings are listed?

The model-specific manual lists 3150 A rated continuous current and 40 kA rated short-circuit breaking current. These values should be reproduced in the final guaranteed technical particulars.

Which operating mechanism is used?

The manual specifies the CTB-1 spring operating mechanism. Confirm the control supply, charging-motor supply and secondary wiring for the order.

Can the manual drawings be used directly for installation?

Use approved drawings for the ordered configuration. The reproduced drawings are manual references; foundation interfaces, terminal details and final dimensions require project confirmation.

What information is needed for a quotation?

Provide the nominal and maximum system voltage, frequency, continuous current, fault level, insulation requirements, site altitude and temperature, auxiliary supplies, required quantity and applicable standard.

Discuss Your 110 kV System Requirements

Send your project specification for the LW36-126. Include the nominal and maximum system voltage, frequency, fault duty, insulation requirements and site conditions so that the offered configuration can be checked.

Related Products

Explore related SF6 circuit breakers and compare product specifications for your project.