Home /Drop Out Fuses / Fuse Cutout

Baocheng Electrical · DRAFT — Technical Verification Pending

Fuse Cutout
15 kV Product Category

Outdoor fuse cutout page prepared for the 15 kV product category. The supplied reference describes distribution-line and transformer protection, but does not identify a 15 kV model or establish its electrical ratings.

DRAFT · 15 kV Model Verification Required

Current & Breaking Duty · To Be Confirmed

Outdoor Fuse Cutout · Configuration Review

Electrical Characteristics

Nominal system voltage

12.7 kV 

Requested voltage category

15 kV

Equipment rated voltage

To be confirmed

Current / breaking duty

To be confirmed

What Is the Fuse Cutout?

A drop-out fuse cutout combines an insulating support, contacts and a hinged fuseholder. A compatible fuse link is selected for overload and short-circuit protection of suitable distribution branches and transformer primary circuits.

Draft — 15 kV product data pending. The supplied FATO reference contains 12 kV and 40.5 kV model tables, but no 15 kV rating row. The category title is retained; those reference ratings are not presented as ratings of a 15 kV Baocheng product.

The reference discusses both ordinary cutouts and load-break configurations. Confirm the offered model, insulation material and switching duty before technical approval. The category-page image is retained for visual continuity and does not verify a rating or configuration.

Technical Specifications & Selection Data

Table 1 — 15 kV Product — Data to Confirm

No.ParameterUnitValue
01Product categorykV15; not a verified equipment rating
02Offered model—To be confirmed
03Equipment rated voltagekVTo be confirmed
04Rated currentATo be confirmed
05Rated breaking currentkATo be confirmed
06Insulation levels & creepage distance—To be confirmed
07Load-switching capability—To be confirmed for the exact configuration

Table 2 — Supplied Catalogue — Reference Coverage Only

No.ParameterUnitValue
01RW7 / HRW7, RW10 / HRW10, RW11 / HRW11kV12 in the supplied tables
02RW5 / HRW5kV40.5 in the supplied tables
03PRWG2 / HPRWG2kV40.5 in the supplied tables
0415 kV model table—Not present in the supplied five-page reference

Source: supplied FATO catalogue, PDF pages 1 and 3–5. Reference-family information is separated from the unverified 15 kV product. No 12 kV or 40.5 kV current, breaking-duty or insulation value has been assigned to this requested product.

Table 3 — Reference Service Conditions — Applicability to Be Confirmed

No.ParameterUnitValue
01Ambient temperature°C−40 to +40
02Installation altitudem≤ 1000; higher-altitude correction mentioned
03Power frequencyHz50 ± 2
04Seismic intensity—≤ 7 degrees, as stated; not a magnitude rating
05Maximum wind speedm/s35

Fuse Cutout: General Arrangement & Operating Principle

Reference Cutout Assembly

Illustrative example / 示例图 — supplied FATO catalogue, PDF page 2. Not a verified photograph or construction drawing of the offered 15 kV unit.

The reference identifies the insulator, upper and lower contacts, operating ring, fuse tube and lower hinge. These labels explain the assembly concept; materials and dimensions must be confirmed for the offered model.

01 Fuse Link Carries Current

In a conventional expulsion cutout, a compatible fuse link carries current while the fuseholder engages the stationary contacts. Select the link by protection coordination, not the cutout current rating alone.

02 Fault Interruption

When the fuse element melts, an arc forms in the fuse tube. The arc-extinguishing lining generates gas that assists interruption. The complete tested combination determines the breaking duty.

03 Drop-Out Indication

The hinged fuseholder opens after operation to provide a visible indication. This general description does not establish a load-switching rating for the requested 15 kV product.

Confirm the Switching Configuration

A load-break attachment or chamber is a separate design feature. The pictured category product and the reference assembly are not enough to establish a permissible switching current or operating method.

Reference Assembly & Model Identification

These supplied-catalogue extracts support terminology and configuration review. They are illustrative examples, not approved 15 kV installation drawings.

Cutout Assembly — Reference Example

Illustrative example / 示例图
Source: FATO reference, PDF page 2
Contact, fuse tube and hinge identification
Not for installation or dimensional measurement

The source image retains its original Chinese callouts. Confirm the offered product construction separately; the reference does not provide a verified 15 kV assembly drawing.

Model Designation — Reference Example

Illustrative example / 示例图
Source: FATO reference, PDF page 1
Designation fields include voltage and current
No 15 kV model is identified in the supplied tables

The model-code diagram explains the reference catalogue format. It does not establish that a 15 kV variant is available. Obtain the full offered designation and approved data sheet.

Applications, Features & Selection Considerations

For the requested 15 kV category, complete the following selection review with the offered product data. These are application considerations, not unverified performance claims.

Network Voltage

Confirm maximum system voltage and earthing.

Protection Coordination

Specify load, fault current and fuse-link curve.

Insulation Selection

Confirm creepage and impulse withstand levels.

Mounting Interface

Check the approved bracket and terminal drawing.

Switching Duty

Identify standard or load-break construction.

Technical Documents & Supply Scope

Fuse Cutout Technical Documents

Request the technical package for the selected configuration:

  • 15 kV model identification and approved electrical data sheet.
  • Insulation and breaking-duty test evidence for that model.
  • Dimensioned installation drawing and terminal specification.
  • Compatible fuse-link curves and operating instructions.

Inspection & Test Documentation

Request the approved data sheet, insulation and breaking-duty test evidence, and inspection records for the exact cutout and fuse-link combination. Check the tested model, configuration and report scope.

The reference mentions GB 15166.3-94. This historical citation is not evidence of certification for a Baocheng 15 kV product. Confirm the applicable standard edition and model-specific reports before publication or procurement.

Supply Scope to Confirm

  • Confirmed 15 kV product designation and equipment rating.
  • Rated current, breaking duty and fuse-link specification.
  • Insulating support, fuseholder and load-break configuration.
  • Mounting hardware, terminals and spare parts.
  • Approved documents, quantity and delivery requirements.

No fixed bill of materials or verified accessory package is established by the supplied reference for the requested 15 kV product.

Installation & Maintenance Review

A model-specific dimensioned drawing is still required. The reference assembly has no approved 15 kV mounting dimensions. Confirm clearances, orientation and operating procedures with the supplied equipment instructions.

Send the network voltage and earthing arrangement, required cutout rating, load and fault current, fuse-link requirements, site conditions, mounting details and quantity with your inquiry.

Fuse Cutout FAQ

No. It is the requested product-category title. The supplied catalogue contains 12 kV and 40.5 kV rating tables, with no 15 kV model row. This page remains a draft until the correct data is supplied.

No. A rating cannot be changed by relabelling the table. The actual model, insulation level, current and breaking duty require their own technical data.

No. The supplied FATO assembly and model-code diagrams are labelled illustrative examples. They are not verified 15 kV product photographs or installation drawings.

The image alone cannot establish switching duty. Obtain the model designation, load-break device specification and approved operating instructions.

Provide the full 15 kV model designation, approved electrical ratings, service conditions and a dimensioned drawing. Confirm the relationship of the supplied reference to the offered product.

Include the network maximum voltage and earthing arrangement, load and fault duty, fuse-link requirements, mounting details, site conditions and quantity.

Related Products

Explore related drop out fuses and fuse cutouts for overhead distribution and transformer protection applications.